Description
SUGON T36 Nano Soldering Station 1S Rapid Heating With JBC Soldering Tip For Integrated Circuit Component Welding Repair
Parameter:
Input voltage: AC 220V 50/60Hz
Power: 85W
Temperature range: 200? – 450? / 232°F – 842°F
Installation Notes:
Attention: Turn off the power and avoiding damaging PCB during unplug or plug in the soldering iron handle
Plugin the soldering iron handle to the proper host socket.
Installation heating element.
Place the soldering station and hang the soldering iron handle on the bracket.
Make sure the power cord is plugged correctly.
Turn on the machine, the display window shows: “—“, it is on standby mode.
Temperature setting and storage:
Heat Up:
Press ? the button once, the temperature window will show the set temperature to up 1?. hold ? the button for at least one second, the set temperature will heat up rapidly until up to the set temperature you did set.
Cooldown:
Press ? the button once, the temperature window will show the set temperature to down 1?. hold ? the button for at least one second, the set temperature will cool down rapidly until down to the set temperature you did set.
After parameter data is set, keep hold the CH1 button to up or down the temperature and save it. similarly, keep hold CH2 or CH3 button to set the storage temperature and save them.
Do bring out the memory temperature, press the CH1 button (less than 1 second), and bring up the saved data, similarly CH2 or CH3 to bring up the memory data as well.
Package includes:
1 x SUGON T36 solder station
1 x Power cable
1 x Solder tip Original JBC